Zeekr 9X Wheel Fitment Guide: PCD, Offset, Center Bore and Brake Clearance
The Zeekr 9X is a 5.2 metre plug-in hybrid SUV that weighs about 2.9 tonnes, so choosing wheels for it is a fitment and load question before it is a styling one. This Zeekr 9X wheel fitment guide sets out the published numbers, the details that still need confirming for your car, and the checks that decide whether a forged wheel will sit correctly on it.
One detail matters early for owners in Southeast Asia. Zeekr Malaysia has said the 9X must be converted to right-hand drive and to European regulations before it arrives, so the wheel specification on your car may differ from the China market data that most databases show.
Key Takeaways
The 9X uses a 5x108 bolt pattern, with a 63.4 mm center bore and M14 x 1.5 lug bolts listed for China and Russia market cars.
Original sizes vary by market: 20 and 21 inch in China market data, 22 inch on Zeekr's European specification.
At about 2,900 kg, the 9X needs a wheel with a load capacity confirmed for the car, not only the right bolt pattern.
Front 6-piston calipers make brake clearance and offset the checks most likely to fail.
Singapore's LTA asks that the overall rolling radius of the wheel and tyre stay the same as original.
Table of Contents
What the Zeekr 9X Asks of a Wheel
The Zeekr 9X asks a wheel to carry about 2,900 kg, take impact loads through a low-profile 22-inch tyre, and clear large front brakes. Zeekr's European specification lists an indicative 2,900 kg kerb weight, a 3,169 mm wheelbase, front 6-piston fixed calipers, 285/45 R22 tyres and 897 hp of combined system output.
Spread across four wheels, 2,900 kg is roughly 725 kg per wheel at rest. With six adults at about 75 kg each, that average rises to about 840 kg, and cornering, braking and potholes push individual peaks higher. Front and rear loads also differ, so treat these figures as an illustration, not a rating. The takeaway is that a 9X wheel needs a load capacity confirmed for the car, which follows the same logic as our guide to load ratings for SUVs, EVs and sports cars.
Forged 6061-T6 construction, explained on our Philosophy page, gives high strength for a given weight, which is why it suits heavy vehicles. It does not replace the fitment checks below.
Zeekr 9X Wheel Specifications by Market
The Zeekr 9X uses a 5x108 bolt pattern, while wheel size and offset vary by market and trim. Wheel-Size lists 5x108 for the 2025 and 2026 models, and Avto Reference adds a 63.4 mm center bore and M14 x 1.5 lug bolts for China and Russia market cars. Some listings write the pattern as 5x4.25 inches. Since 4.25 inches is 107.95 mm, it is the same circle.
Item | China and Russia market data (2026) | Zeekr European specification |
Wheel diameter | 20 or 21 inch | 22 inch |
Tyre size | 255/60 R20 or 275/50 R21 (285/45 R20 also listed) | 285/45 R22 |
Rim width and offset | 8.5J ET0 (20 inch), 9J ET0 (21 inch), 9.5J ET37.5 (20 inch, listed separately) | Not published |
Bolt pattern | 5x108 | Not published on the model page |
Center bore | 63.4 mm | Not published |
Fasteners | M14 x 1.5 lug bolts | Not published |
Both databases are third-party compilations, and Zeekr's model page does not publish bolt pattern, bore or offset. Treat the China market rows as reference data for your fitment check, not a guarantee for your car.
Aura Forged publishes vehicle data in its fitment library for the Geely group and on pages such as the Tesla Model Y fitment page. A Zeekr 9X entry is not published yet, so we check each 9X individually.
Why Market Specification Changes Your Fitment
Market specification changes fitment because tyre size, homologation and suspension tuning change with the market. Zeekr Malaysia's general manager said in February 2026 that the 9X launch depends on right-hand drive engineering and a move from Chinese to European regulations, as reported by paultan.org.
Zeekr's European page lists 22-inch wheels, while China market data lists 20 and 21 inch. This suggests Southeast Asian cars may follow the European specification, but that is an inference, not a confirmed spec, and it can vary by trim and country. The practical step is to read the tyre placard on your car and send us your model and year, so the fitment is checked against your car rather than a database row.
Send us your car for fitment. Tell us your car, we'll confirm the right fit.
Brake Clearance, Offset and Center Bore Checks
Brake clearance, offset and center bore are the three checks most likely to fail on a large SUV with big front brakes.
Brake Clearance
The 9X front axle uses 6-piston fixed calipers. A wheel needs enough barrel depth and spoke clearance around the caliper body, and a diameter that matches on paper can still touch the caliper. This is one reason forged wheels are specified per car and not as a universal size.
Offset
The listed sizes in the China and Russia market data span from ET0 to ET37.5, a 37.5 mm spread. Each 10 mm change in offset moves the wheel face 10 mm relative to the fender and suspension, so a wide wheel that clears at one offset can rub at another. Our guides to offset and PCD and to how offset and width change fitment cover the geometry.
Center Bore
The hub size in the China and Russia data is 63.4 mm. A wheel with a larger bore needs 63.4 mm hub centric rings to centre on the hub, and a smaller bore will not mount. Poor centering can show up as vibration, which our article on balance and runout explains.
Monoblock or Modular for the 9X
A monoblock wheel is machined from one forged piece, while a modular wheel joins a separate centre and barrel so width, offset and brake clearance can be set exactly. Three Aura series are relevant to a full-size SUV. The monoblock Precision Series is built around strength and low weight, the Modular Series suits builds that need a specific width or offset, and the Dakar Series is engineered for SUVs and pickups where load capacity leads the brief.
The fitment data chooses the series, not the other way round. Our comparison of one-piece and multi-piece wheels covers the trade-offs. Aura Forged wheels are quoted per fitment, and the ordering process page explains the steps.
Keeping the Wheel and Tyre Package Road Legal
In Singapore, LTA sets three requirements for replacement tyres: the width, profile and diameter the manufacturer recommends, no lateral protrusion from the body, and an overall rolling radius that stays the same as original (LTA OneMotoring).
For a 9X, that means pairing any new wheel diameter with a tyre that keeps the rolling radius close to the original. A tyre calculator helps. Malaysia, the Philippines, Thailand and Indonesia have their own rules, so confirm locally before ordering. If something goes wrong after purchase, our Warranty and Support pages explain how we handle it.
Zeekr 9X Wheel Fitment FAQs
What is the bolt pattern of the Zeekr 9X?
The Zeekr 9X uses a 5x108 bolt pattern in the fitment data published for 2025 and 2026 models. Some databases write it as 5x4.25 inches, which is the same 108 mm circle. Confirm it against your exact car before ordering.
What is the Zeekr 9X center bore?
Fitment data for China and Russia market cars lists a 63.4 mm center bore with M14 x 1.5 lug bolts. A larger wheel bore needs 63.4 mm hub centric rings. Confirm the figure for your market variant first.
What wheel and tyre size does the Zeekr 9X come with?
China market data lists 255/60 R20 and 275/50 R21, plus a 285/45 R20 option. Zeekr's European specification lists 22-inch alloys with 285/45 R22 tyres. Size depends on market and trim, so check your tyre placard.
Can I fit larger wheels on a Zeekr 9X?
Only if the overall rolling radius stays the same as original and the tyres do not protrude from the body, which is Singapore's LTA guidance. Brake caliper clearance and offset must also be confirmed for the wheel.
Are forged wheels suited to the Zeekr 9X's weight?
The 9X weighs about 2,900 kg, so load capacity matters. Forged construction gives high strength for its weight, but the load rating must be confirmed for the specific wheel and car before ordering.
Get Your Zeekr 9X Fitment Checked
Published data gets you close, but only a fitment check against your exact car settles bolt pattern, center bore, offset, brake clearance and load. Send us your car for fitment, including model, year and current wheel and tyre size, and we will confirm what suits it.
If you are still deciding between series, message us to check availability for your car and browse all forged wheel designs in the meantime.
References
Zeekr Europe, Zeekr 9X model page (2026): kerb weight, wheelbase, front calipers, 22-inch wheels and 285/45 R22 tyres on the European specification.
Avto Reference, Zeekr 9X 2026 wheel data: center bore, thread size, OE sizes and offsets for China and Russia market cars (third-party database).
Wheel-Size, Zeekr 9X 5x108 bolt pattern (2025 to 2026): independent confirmation of the 5x108 pattern (third-party database).
LTA OneMotoring, Vehicle Technologies and Modifications: tyre replacement requirements in Singapore.
paultan.org, Zeekr 9X coming to Malaysia (February 2026): right-hand drive engineering and European regulation conversion.
Related Blogs
Forge Further
Comments